Vehicle Crash Data Retrieval - CDR Ford pCM Cable f00k108224

CABLE: #F00K108224 - Ford PCM Cable
Price subject to change without notice

USA Orders: $125.00
Part#: F00K108224

View Shopping Cart

Canadian Orders: $131.25

Canadian orders and phone orders please call: (800) 280-7940

These Powertrain Control Modules (PCM) are capable of capturing up to 409 seconds of data from 16 PCM inputs/outputs every 0.2 seconds. When the PCM receives a Restraint Deployment Signal (RDS) from the Restraint Control Module (RCM) indicating a seatbelt or airbag deployment event occurred, the PCM will lock 404 seconds of "pre-crash" and record 5 seconds of "post crash" data in the PCM’s memory. If an RDS is not received, the PCM will record these 16 inputs/outputs until the vehicle’s ignition is switched off or power is removed from the PCM.

Important: You must use the cables and adapters provided in the Ford PCM Interface kit and follow the instructions provided in this help file to ensure that the data is collected without accidental data spoliation.

CDR reports include the following information received from the PCM:

Buffer Address	The hex address of the PCM’s circular buffer.
Relative Time (calc.)	Calculated Relative Time in seconds calculated by the CDR system. This calculation is based on the PCM writing values for each parameter into memory every 0.2 seconds (200 ms). Is only displayed if an RDS was received.
Restraint Deployment Signal	Signal status from the Restraint Control Module (RCM) which indicates the RCM commanded the airbags/restraint devices to be deployed.
Speed, Vehicle Indicated	Vehicle speed in MPH which is proportional to wheel speed. If wheels are locked this value will indicate 0 mph.
Accelerator Pedal % Full	Accelerator pedal rotation in percent.
Engine Throttle % Full	Throttle valve (on engine) percent open.
Brake Switch	Brake light switch status. On means the switch turns on the brake lights and Off means the switch turns brake lights off.
Brake SC De-ac	Brake pedal speed control deactivation switch. On means the switch provides deactivation of Speed Control and Off means the pedal position is not deactivating the Speed Control.
ABS	Antilock Brake system status. Active means the ABS system is enabled and Inactive means the system is off or disabled.
Transmission – Neutral	Neutral transmission gear status. A Neutral value means the transmission indicator was in the Neutral position and a ‘Not Neutral’ value means the indicator switch was in any position other than Neutral.
Transmission – Reverse	Transmission in reverse gear indicator. A ‘Reverse’ value means the transmission indicator was in the Reverse gear position and a ‘Not Reverse’ value means the indicator switch was in any position other than Reverse.
Speed Control	Indicates if Speed control was on or off.
Engine RPM	Engine Revolutions Per Minute.
Wheel Torque Commanded (calculated)	Commanded torque at wheels (calculated)
Wheel Torque Actual (calculated)	Actual torque at wheels (calculated)
Traction Control	Indicates of the traction control system is active, meaning enabled or not active meaning the system is off or disabled.
Stability Control	Integrated Vehicle Dynamics Active means the system is on or enabled and Inactive means the system is off or disabled.
Key on Timer – 63.75 Max (sec)	Key on Timer parameter counts up from 0 on key on and stops at 63.75 seconds until the ignition switch is cycled off and then on again.
Vehicle Identification Number	This number is retrieved from the PCM
PCM File Name (calibration level)	This file name is recorded in the PCM
PCM Part Number	Retrieved from the PCM

>> Back to CDR Cables

CRASH DATA GROUP is the exclusive distributor for the Bosch CDR Product line

** CRASH DATA GROUP is an authorized reseller for the Canadian Territory

Please Note: Specials and discounts vary depending on sales territory. This is due to the contractual differences between CRASH DATA GROUP and Bosch USA/Bosch Canada